EZ-RO REVERSE OSMOSIS SYSTEMS
Easy, Expandable, and Efficient. That’s the new EZ-RO. EZ-RO REVERSE OSMOSIS SYSTEMS Choosing the right filtration system is essential for foodservice applications to ensure a consistent, quality customer experience. The Pentair® Everpure® EZ-RO™ is all that’s needed to reduce contaminants and protect equipment with one simple system that can grow with your business.
The 7CM/4CM mineral addition replacement cartridge is used with the EZ-RO series reverse osmosis (RO) systems. Reintroduces a balance of calcium and magnesium into post RO water and stabilizes pH.
Description
Choosing the right filtration system is essential for foodservice applications to ensure a consistent, quality customer experience. The Pentair Everpure EZ-RO is all that’s needed to reduce contaminants and protect equipment with one simple system that can grow with your business.
- The 7CM/4CM mineral addition replacement cartridge is used with the EZ-RO series reverse osmosis (RO) systems. Reintroduces a balance of calcium and magnesium into post RO water and stabilizes pH.
- All-in-one system includes everything you need with no additional SKUs or costs.
- Expandable system can grow as your business grows.
- Superior performance allows maximum water savings and output.
- Creates consistent, great-tasting beverages.
- EZ-RO Floor Stand Kit Available (EV315968)
- High efficiency RO membrane saves up to two times more water than standard RO membranes. (Up to 50% water recovery compared to standard RO systems with up to 25% recovery.)
| APPLICATION | SYSTEM | BENEFITS |
| Coffee and Espresso | EZ-RO Blended with Hydropneumatic Tank – Coffee |
|
| Steam | EZ-RO with Hydropneumatic Tank – Steam |
|
Everpure EZ-RO Replacement Cartridges
The Pentair Everpure EZ-RO replacement cartridges, used with the EZ-RO systems, deliver RO and blended quality water for coffee, espresso and steam applications. These filter cartridges help minimize limescale buildup and corrosion due to high dissolved solids (TDS) and chlorides often found in hard water. These features help ensure reliable equipment operation and deliver product consistency.
- TDS & scale reduction
- Easy, quick-change replacement cartridges
- Certified under NSF/ANSI Standards 42 & 53
Which systems require electricity? What voltage is required?
Only the atmospheric tank/processor requires a power source. 120V is required.
How long does it typically take to install the EZ-RO?
Once the installation area is prepared, the EZ-RO can be installed in 45-60 minutes. Note: Install time does not include time required to flush cartridges.
Do cartridges need to be pre-flushed?
Yes. The prefilter and mineral cartridges need to be flushed until the water runs clear. This takes about five minutes. The RO membrane needs to be flushed for at least one hour and, per the National Sanitation Foundation (NSF), up to 24 hours.
How far away can the tank be located from the processor?
The tank should be no further than 10 feet away from the processor.
How does Pentair determine which style of tank to recommend?
The style of tank depends on the tank size needed. The tank size depends on the amount of water a customer needs during peak hours and the RO membrane’s ability to refill the tank.
How often do the FC and CM cartridges need to be replaced?
- Prefilter cartridges: every 6 months.
- Mineral addition cartridge: every 1 year or as needed.
- RO membrane cartridge: every 18 to 24 months.
